Automatic Chlorine Controllers

The Combined Chlorine Controller and pH Indicator (Also suitable for Bromine)

Pool water maintenance requires a constant level of chlorine, regardless of bathing load, temperature and fresh water dilution. 

All of which will vary the amount of chlorine used. 

To help in this important operation, we  have developed the WATER WATCH system. 

This special device automatically controls a chemical feeder to maintain a constant level of sanitizer.

The pH indicator will continually read the acid and alkali balance in your pool water to warn of damaging high or low levels.  High levels of acid can burn metal parts of the pool, such as metal pipes, heat exchangers, stainless steel steps.


 

High levels of acid can burn metal parts of the pool, such as metal pipes, heat exchangers and stainless steel steps. 

High levels of alkali can cause scale formation.

The Automatic Chlorine Controller

This machine will adapt to our chemical feeder by means of a special solenoid valve.

The electrode sensor housed in our flow cell, monitors the level of chlorine in your pool. 

This reading is then compared with the pre-set level of your automatic chlorine controller, which in turn regulates the correct P.P.M chlorine level.

This combined unit gives an accurate control to chlorine levels and pH indicator of your pool water, or with some additional equipment,

THE WATER WATCH system will automatically maintain pH balance